Get matched with top pressure washers in Webster, SD

While it can be a good idea to learn how to pressure wash brick to remove oils, algae, and debris from the surface, pressure washing isn't a good option for getting rid of white stains on brick. While you may get good temporary results, pressure washing can actually make efflorescence worse once the brick dries because the process pushes salt deeper into the brick. In addition, the intensity of pressure washing can damage brick.

Yes, you can, but you’ll need to acquire the right pressure washer tips and cleaning solutions for the job. In particular, you’ll need tips that are capable of lowering the pressure from a max of 3,500 PSI to between 150 and 300 PSI. As for the cleaning solution, look for options that are clearly marked for soft washing rather than pressure washing. 

A pressure washer is okay to use on epoxy floors and won’t remove the concrete coating if you use a lower pressure setting and the correct nozzle, such as a green, white, or black nozzle, for gentle cleaning. Be careful using a power washer, which adds heat to the pressurized water, because this may be too powerful and could damage the epoxy.

Always begin by removing large debris, leaves, and branches from your lawn to make room for the rest of your lawn maintenance checklist. Move on to mowing, weeding, and edging in the spaces between your lawn and garden. Lastly, clean off all hardscapes, porches, and patios for a fresh and tidy appearance.