Best driveway gate pros near Tyndall, SD

Generally, the standard 10- to 12-inch-long and 1- to 1.5-inch-diameter gate springs will work. However, if you have an especially wide, thick, or heavy garden gate, you may need to opt for a longer, broader—and pricier—model to ensure secure closure and good longevity. These typically range between 12 and 16 inches long and are over 1.5 inches in diameter.

While there’s no hard evidence to support this idea, driveway gates at least provide an additional obstacle that may deter crime. After all, a would-be burglar or trespasser would have to break into the gate and the property itself. The extra work could encourage them to move onto a house without a driveway gate.

If you only use your gate as a pedestrian, walking through without a vehicle, you’re fine to stick with a single fence gate. If your fence opening needs to accommodate vehicles of any kind, from cars to trucks to 4-wheelers, then a double fence gate will suit the space much better and give you more freedom. 

While it is possible to install a manual gate yourself, it is generally not recommended. Professional installation is strongly advised, especially for automated or large driveway gates. Gates can be extremely heavy, sometimes weighing hundreds of pounds, which makes them bulky and dangerous to maneuver into place. Proper installation requires perfect positioning and balancing to ensure the gate swings smoothly and functions as intended. For automated gates, the wiring is also hazardous and typically requires a licensed electrician. Mistakes during a DIY installation can be costly, as materials alone can average around $1,000. Given the safety risks and the difficulty of achieving a proper setup, it is best to hire a professional gate installer.