Get matched with top sandblasting pros in Tabor, SD

Q: How much does sandblasting cost?

• <div><p>The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.</p></div>

Q: What are the benefits of sandblasting?

• <div><p>Sandblasting removes old paint, rust, and grime efficiently, providing a clean surface for refinishing.</p></div>

Q: How much does it cost to sandblast a door?

• <div><p>Your pro will most likely bill you at an hourly rate of <b>$50 to $80 per hour</b> to sandblast a door due to its small size. This type of job won't take long, so if you have other surfaces that need cleaning, schedule those tasks at the same time to get your money's worth from your pro's visit.</p></div>

Q: How do I maintain flatwork surfaces?

• <div><p>Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.</p></div>

Q: Which costs more: soda blasting or sandblasting?

• <div><p>Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you&rsquo;ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable&mdash;further reducing the cost. The total cost for either will depend on the size of the system.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Tabor, SD?

Select your specific project to find the pro for you.

Verified Reviews for Sandblasting Service pros in Tabor, SD

*The Angi rating for Sandblasting Service companies in Tabor, SD is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Sandblasting Service needs.

*The HomeAdvisor rating for Sandblasting Service companies in Tabor, SD is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Sandblasting Service needs.

Last update on November 28, 2025

Reviewed in November 2025
I hired this cleaning company after a construction project in my home, and they did an excellent job. They were very professional, punctual, and detailed with their work. They removed all the dust, debris, and stains, leaving everything spotless and fresh. I?m very satisfied with the results and...
Ariel Cleaning Services
Request a quote
Reviewed in May 2025
Jarod removed several large trees for me that were inaccessible with equipment. He cut down the trees and hauled away all the wood and branches. He did a fantastic job at a very reasonable price. I would highly recommend his service.
605 Firewood and Tree Services LLC
Request a quote
Reviewed in October 2021
We were very happy with the results. The prices were more than fair. Communication was above and beyond expectations. The work was very thorough and well done. We highly recommended Lanphear's Affordable Services and we would certainly hire them again.
Lanphear's Affordable Services
Request a quote
Reviewed in August 2020
Very knowledgeable in the work they. Great customer service. Would definitely hire them again.
Ironclad Construction
Request a quote
Reviewed in September 2019
I hired SD Lining thru Home Advisor because we live out of state from where we needed service. They responded to the job in minutes. The job was completed in a couple days. Ben kept me updated on everything via phone & did an exceptional job. I was leary hiring someone I had never met, but...
SD Lining Solutions
Request a quote
Reviewed in March 2019
Had them replace my water heater. Great customer service, product and quality of work is amazing. Juan was very professional, took pride in his work and his work ethic and craftsmanship were top notch. Had 2 other quotes done before hand, Noble was more than a $1000 and $600 cheaper. ...
Noble Plumbing, Inc.
Request a quote
Reviewed in February 2019
Fast, courteous service. Knowledgeable and helpful. Will hire them again in the future.
Horizon Home Services
Request a quote
Reviewed in May 2018
Job donbe. No problems. Courteous service!!!
Farrell Plumbing & Cooling, Inc.
Request a quote
Reviewed in March 2018
Fast service. Good quality work at a fair price. I would recommend Enrique.
Tello Drywall
Request a quote
Reviewed in May 2017
Very friendly, courteous and professional service. Thanks Ritchie!
Christian Friends Overhead Doors, LLC
Request a quote

Find Sandblasting pros in Tabor

No results for Sandblasting pro in

Try adjusting your search criteria.

Sandblasting Services questions, answered by experts

The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.

Sandblasting removes old paint, rust, and grime efficiently, providing a clean surface for refinishing.

Your pro will most likely bill you at an hourly rate of $50 to $80 per hour to sandblast a door due to its small size. This type of job won't take long, so if you have other surfaces that need cleaning, schedule those tasks at the same time to get your money's worth from your pro's visit.

Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

The Tabor, SD homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Nick P. Cellucci
•
Apr 6, 2026Apr 6, 2026
How Much Does It Cost to Rent a Sandblaster? [2026 Data]
Sandblasting is a powerful method to remove paint, primer, and other coatings from hard surfaces. Learn the cost to rent a sandblaster and the factors involved.
Nick P. Cellucci
•
May 30, 2026May 30, 2026
How Much Does It Cost to Sandblast? [2026 Data]
The cost to sandblast your home’s exterior or another surface on your property depends on the method and the materials you use. Learn more with this guide.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Sandblasting Services
Wondering who to hire to sandblast? Learn how sandblasting services work, which contractors to call, and how to choose the right pro.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Sandblasting Pro
Learn how to hire a sandblasting pro for your project. Find qualified professionals, ask the right questions, and get expert surface cleaning.
Mitchell Grant
•
Apr 10, 2026Apr 10, 2026
What Is Sandblasting? Everything You Need to Know
Sandblasting is a powerful technique used to strip paint, rust, and other material from a surface. Learn when you’d use this technique, its cost, and how it works.
Deirdre Sullivan
•
May 21, 2026May 21, 2026
What Is Sandblasting Paint Removal?
Sandblasting is a paint removal technique that uses high-speed projection to strip a surface. Learn about sandblasting for paint removal and when you should avoid it.