Get matched with top sandblasting pros in Parkston, SD

Q: How much does sandblasting cost?

• <div><p>The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.</p></div>

Q: Is it better to sand or pressure wash a deck?

• <div><p>Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.</p></div>

Q: What is the best way to sand a deck?

• <div><p>The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods. </p></div>

Q: What are the disadvantages of sandblasting?

• <div><p>The disadvantages of sandblasting are noise, mess, and risk. Sandblasters are louder than chainsaws and spread debris on the ground and through the air. Let your neighbors know that you're sandblasting so they can prepare. Sandblasting can damage your property if not done properly, so thoroughly vet any pros you talk to before hiring.</p></div>

Q: Can I sandblast exterior surfaces myself?

• <div><p>DIY is possible, but professional services ensure even removal, safety compliance, and proper cleanup.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Parkston, SD?

Select your specific project to find the pro for you.

Find Sandblasting pros in Parkston

No results for Sandblasting pro in

Try adjusting your search criteria.

Sandblasting Services questions, answered by experts

The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.

Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

The disadvantages of sandblasting are noise, mess, and risk. Sandblasters are louder than chainsaws and spread debris on the ground and through the air. Let your neighbors know that you're sandblasting so they can prepare. Sandblasting can damage your property if not done properly, so thoroughly vet any pros you talk to before hiring.

DIY is possible, but professional services ensure even removal, safety compliance, and proper cleanup.

The Parkston, SD homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Nick P. Cellucci
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Sandblast? [2026 Data]
The cost to sandblast your home’s exterior or another surface on your property depends on the method and the materials you use. Learn more with this guide.
Nick P. Cellucci
•
Jul 20, 2026Jul 20, 2026
How Much Does It Cost to Rent a Sandblaster? [2026 Data]
Sandblasting is a powerful method to remove paint, primer, and other coatings from hard surfaces. Learn the cost to rent a sandblaster and the factors involved.
Angi
•
Jul 8, 2026Jul 8, 2026
How Much Does Powder Coating Cost? [2026 Data]
Powder coating can give your furniture, car, and other objects a new look. Learn what powder coating costs by object, size, and other factors with this guide.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Sandblasting Services
Wondering who to hire to sandblast? Learn how sandblasting services work, which contractors to call, and how to choose the right pro.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Sandblasting Pro
Learn how to hire a sandblasting pro for your project. Find qualified professionals, ask the right questions, and get expert surface cleaning.