Top-rated driveway sealcoating pros.

Best driveway sealcoating pros near Tabor, SD

Enter your zip and get matched with up to 5 pros

Need a pro for your driveway sealcoating project in Tabor, SD?

Select your specific project to find the pro for you.

Top-Rated Driveway sealcoating pros in Tabor - Updated Nov 2026

Driveway Sealcoating FAQs, answered by experts

Chip seal roads and driveways are slightly more expensive than gravel, but significantly more affordable than traditional asphalt. Chip seal works wonders when used as a top coat. Its lighter color is less heat-absorbant than black asphalt. It also renews your aging, deteriorating asphalt without having to spend on major repairs or redoing the entire driveway.

Since freeze-thaw cycles throughout the winter months can damage your driveway, it's best to winterize your driveway in the late fall before the first freeze hits. Doing so will help to protect your driveway from damage throughout the winter season. Plus, drier, warmer weather makes applying and curing sealant much easier.

Yes, it’s possible to seal your driveway too much. Whether you have an asphalt or concrete driveway, sealing it every year opens your driveway to potential damage. Sealing an asphalt driveway annually may cause the seal to crack and peel even more. It may even trap oils within the asphalt that can leave you driving on a soft driveway. Avoid sealing your concrete driveway too much to prevent the concrete from cracking. If water enters these cracks, it can freeze, expand, and cause the cracks to worsen.

You should plan on sealing your driveway about once every five years, although you should plan to do it once every three years if your area experiences frequent rain or snow. Sealing your driveway protects it from moisture, UV rays, and chemicals from your car, like motor oil and antifreeze. If you find that your driveway stains easily or appears to be cracking or fading, you may want to schedule a sealing service regardless of when you last sealed it.

The three most common types of asphalt are hot asphalt, MC cold mix, and UPM asphalt. Hot asphalt is used most often for paving and patching roadways while it’s hot and workable. MC cold mix asphalt cures more slowly than hot asphalt, but it can be used for temporary patches and repairs in low-traffic areas. UPM is also used cold, but it can be used as a longer-term fix, usable in almost any conditions at almost any temperature.

The Tabor, SD homeowners’ guide to driveway sealcoating

From average costs to expert advice, get all the answers you need to get your job done.