Get matched with top masons in Philip, SD

When painting brick, each application method has distinct advantages and disadvantages. Spraying is significantly faster but may not penetrate deeply beyond the surface layer. Rolling is effective for working paint into the brick's texture but can be less effective on mortar joints. If you opt for a roller, choose a thick nap of at least a half-inch to ensure paint gets into all the crevices for even coverage. Using a brush is generally not recommended as it is very time-consuming and provides poor surface penetration. Ultimately, a combination of spraying followed by back-rolling is often the best strategy for a durable and even finish.

Masonry work tends to be more expensive because the materials can be costly, such as natural stone and brick. Masonry is also very labor intensive, typically making up 50% or more of the final project cost. In addition, quality masonry work requires years of training and experience, as with any skilled trade.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

You can hang holiday lights on brick without drilling by using hot glue, outdoor tape, or brick clips for your project. There are plenty of alternatives to consider, so consult a professional Christmas light installer to discuss the best options to preserve your brick exterior.