Get matched with top percolation testing pros in Montrose, SD

Asbestos testing takes place in two stages—collection and lab testing. Collection can take less than 20 minutes if a professional manages to get a direct sample. If air samples are required, then the pro will set up a testing device and return to collect it. In both cases, the sample is sent to a lab and results are confirmed or denied usually within one to two days.

Professional asbestos testers or environmental consultants are the best people to call to test for asbestos. An asbestos testing company specializes in collecting and analyzing samples and will be the most qualified to do the job for you. An environmental consultant may not specialize in handling asbestos, but should still have the knowledge and know-how to safely collect a sample and send it off for analysis.

Asbestos itself does not typically leak from a roof. However, if an asbestos-containing roof is damaged or deteriorated, it can release asbestos fibers into the air. This can occur when the roof is disturbed, such as during maintenance or repairs, or due to weathering over time. Exposure to airborne asbestos fibers can be harmful to health, so it is important to address any damaged asbestos roofs promptly and safely.

Asbestos was commonly used in cloth wiring, but not all types of cloth wiring contain it. The age, condition, and appearance of the wiring can provide clues as to whether asbestos is present or not, but the only way to know for sure if the wiring has asbestos is to have it tested.