Best fireplace pros near Mobridge, SD

To reset an electric fireplace, first shut the unit off using the control panel or remote control. Make sure the unit is entirely shut down, then unplug it from the power outlet. Wait five to 10 minutes, then plug the fireplace back in and turn it on. This process should reset the electric fireplace. After resetting, make sure to set the thermostat, timer, and other programmable settings to suit your preferences.

A liter of bioethanol costs $11 and burns for around four hours, making it cost around $2.75 per hour to keep your bioethanol fireplace running. For comparison, natural gas costs around $0.50 per hour, and propane costs around $1.60 per hour. 

How much it costs you to run your bioethanol fireplace largely depends on how often you use it. Hypothetically speaking, if you run your fireplace for four hours a week year-round, you’ll go through one liter of biofuel per week or about $570 per year to run the fireplace.

Avoid using abrasive cleansing powders on natural stone, as these products could damage the porous material. Using bleach is also a poor idea because of the porosity of the stone. Avoid using a scrub brush with metal bristles, as they could scratch the stone. If you know who manufactured your stone or who installed the fireplace, you may want to contact that entity for any advice on cleaning it safely.

Certain fireplace repairs will require that your contractor is licensed, including anything that involves moving, installing, or repairing gas lines. In that case, your professional will need to be a certified plumber. You can use Angi’s licensing lookup tool to confirm that the company you’re hiring is properly licensed. Most states don’t have specific license requirements for other fireplace repairs, but most demand at least a general contractor’s license. It’s also a good idea to look for companies certified by the National Fireplace Institute, as those pros tend to be more qualified to carry out the repair.