Top-rated pressure washers.

Get matched with top pressure washers in Lemmon, SD

Enter your ZIP and get matched with up to 5 pros

Need a pro for your pressure washing project in Lemmon, SD?

Select your specific project to find the pro for you.

Find Pressure washers in Lemmon

Avatar for Lamb Painting

Lamb Painting

PO Box 306
5.00(
4
)

Lamb Painting

PO Box 306
5.00(
4
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Lamb Painting is a residential and commercial painting contractor providing high quality custom painting and related services to clients in the Northern Black Hills area who seek quality, value and integrity when they hire a painting contractor. We specialize in residential and commercial, custom painting. We also provide carpentry, drywall and general construction services. We’re in the business of protecting your property and the relationship we have with you. The best craftsmanship and products will be used on your project, which provides real value with a long lasting and attractive result.

Lamb Painting is a residential and commercial painting contractor providing high quality custom painting and related services to clients in the Northern Black Hills area who seek quality, value and integrity when they hire a painting contractor. We specialize in residential and commercial, custom painting. We also provide carpentry, drywall and general construction services. We’re in the business of protecting your property and the relationship we have with you. The best craftsmanship and products will be used on your project, which provides real value with a long lasting and attractive result.

Pressure Washing questions, answered by experts

It takes about 15 minutes per each side of an exterior house to apply detergent and 15 minutes to remove it, so you’ll need roughly two hours for the whole job. However, that length of time may decrease or increase depending on the size of your home, so always budget a little more than expected to ensure you don’t end up rushing to get it done.

Jet washers can last for up to 10 years, but a more exact timeline for your jet washer depends on the frequency of use and maintenance. Some machines are given a rating of their approximate total hours of usage, which can help determine how long yours will stick around based on how many hours you use it each year. Aside from learning how to properly use the jet washer, you’ll want to keep it stored safely and securely so that it won’t rust or get damaged between uses.

A good PSI for a pressure washer will depend on the job you're doing. Pressure washer PSI ratings range from 1,300 to 4,200 PSI. Lower PSI is suitable for cleaning dirt and debris off of softer materials. Use a low PSI when pressure washing vinyl siding , wood, or stucco. A heavy-duty job like cleaning graffiti off of concrete or brick will require at least 2,000 PSI.

This answer is a bit tricky because experts say both. You should apply your cleaning solution from bottom to top, but rinse from top to bottom to avoid streaking. When it comes to multi-story houses, you’ll want to start at the top floor and work your way down, but follow the above instructions for each level as if it were an independent structure, rather than washing the whole house as one unit.

The answer to how often you should pressure wash your house is the same no matter whether your siding is wood, metal, or vinyl. Plan to do a project like this once a year with occasional hand cleanings in between to remove unexpected dirt—like debris from an especially violent storm or droppings from birds flying overhead.

The Lemmon, SD homeowners’ guide to pressure washing services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"