Get matched with top pool and spa technicians in Jefferson, SD

Unfortunately, a hot tub does use a relatively large amount of electricity. In fact, much of the money you spend on your hot tub will go toward electricity costs to keep the water heated. A typical hot tub will use anywhere from 1,500 to 6,000 watts of electricity per month.

When your hot tub is completely dry, there is typically no need to introduce antifreeze into the plumbing. However, if you desire an extra layer of protection against potential freeze damage, you can consider adding some RV antifreeze to your hot tub lines. Just ensure that you use RV antifreeze specifically, as automotive antifreeze is highly toxic and should be avoided.

Yes, hot tubs are meant to be kept on permanently. It takes more energy to ramp up a hot tub when you turn it on, so leaving it on all the time is more efficient for your hot tub. You can turn the temperature down if you know you won’t be using it for an extended period of time to save on energy costs.

For a fully-foamed hot tub, freezing typically occurs when the temperature drops below 28 degrees Fahrenheit and remains at or below this level continuously for a minimum of 36 hours. If your hot tub and pumps are still operational, however, the water circulates, and this continuous movement helps prevent freezing, even in very cold conditions. This circulation, along with the insulation provided by the foam, helps maintain the water temperature and prevent it from freezing during extended cold periods. Still, if you’re not planning to run it regularly, be sure to winterize the hot tub properly to prevent damage from freezing.