Get matched with top concrete resurfacing pros in Howes, SD

You can apply an exposed aggregate finish to existing traditional concrete, but you’ll need to resurface the concrete and include aggregate in the top layer of concrete. You’ll also need to prepare the surface beforehand to ensure a good bond between the materials. Adding exposed aggregate is a job best handled by a concrete professional.

Yes, you can pour new concrete over old concrete, but you need to apply a concrete bonding agent to the existing concrete to ensure the new concrete sticks. Keep in mind that even with a bonding agent, large cracks and other flaws will still come through. If the concrete has heaved, settled, or cracked, pouring new concrete on top won’t address any root structural problems. Removing the existing concrete and rebuilding will be your best solution in that case.

Concrete resurfacing is the process of applying a new, thin layer of concrete over an existing concrete slab to enhance its appearance and durability. The terms 'concrete resurfacing' and 'concrete overlay' are often used interchangeably, though the exact meaning can vary between contractors. Generally, both refer to applying a layer of pre-blended concrete, typically between 1/4-inch and 1-inch thick. Some contractors may use 'overlay' to describe a thicker application that adds structural integrity, while 'resurfacing' might refer to a thinner, more cosmetic layer. This process is a cost-effective alternative to completely replacing the concrete, as it uses significantly less material than pouring a new 4-inch slab. Resurfacing also provides an opportunity to add new colors or stamped textures. Other names for this process include concrete restoration, concrete refinishing, and concrete rejuvenation.

Yes, all basement floors crack in response to the natural settlement of the soil around them and from concrete shrinkage as it cures, and you’ll see hairline cracks as a result. However, you should keep an eye on your basement floor to see if cracks continue to lengthen or widen or show signs of water intrusion. In any of these cases, the problem is likely not settling or shrinkage, and a professional repair is necessary.