Will buckled floors go back down?

• <div><p>If there’s minimal buckling and it was caused by minor moisture damage, the planks may lay flat again once you’ve addressed the underlying issue. However, laminate floors that have experienced significant moisture damage won’t lay flat and must be replaced. If the issue only affects one or two boards, you can replace them yourself relatively easily. However, it’s best to call a pro if the problem is more widespread.</p></div>

Top-rated leather and vinyl repair specialists.

Get matched with top leather and vinyl repair specialists in Hot Springs, SD

Q: Does vinyl flooring scratch easily?

• <div><p>In general, vinyl flooring resists scratches, dents, and tears, but this can vary from one type of vinyl (and manufacturer) to another. Vinyl flooring has a wear layer that ranges in thickness from 6 to 20 millimeters. This layer offers protection against standard scratches, but vinyl with a thicker wear layer will resist scratches better than those with a thin layer.</p></div>

Q: What’s the max PSI that won’t damage vinyl?

• <div><p>Although it isn&rsquo;t recommended to use more than 1,500 pounds of force per square inch (or PSI) on delicate siding materials like wood and metal, it&rsquo;s safe to use more than that on surfaces made of stone, cement, and, yes, vinyl. In most cases, you can use up to 3,500 PSI without any problems, though you&rsquo;ll want to make sure to use a tip with a spray span that better disperses this pressure, like a green or yellow tip.</p></div>

Q: Will buckled floors go back down?

• <div><p>If there&rsquo;s minimal buckling and it was caused by minor moisture damage, the planks may lay flat again once you&rsquo;ve addressed the underlying issue. However, laminate floors that have experienced significant moisture damage won&rsquo;t lay flat and must be replaced. If the issue only affects one or two boards, you can replace them yourself relatively easily. However, it&rsquo;s best to call a pro if the problem is more widespread.</p></div>

Q: Do professionals match existing flooring during repairs?

• <div><p>Yes, professionals aim to match the existing material and pattern as closely as possible to ensure a seamless look.</p></div>

Q: Should I worry about uneven floors?

• <div><p>Uneven floors often signal structural issues in a home, so taking them seriously is vital. If you buy an older home with slightly uneven floors, check that your inspector thoroughly inspects the foundation to catch any potential issues early. And if you notice that your floors are becoming more uneven over time, call a pro to check your foundation ASAP.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your leather and vinyl repair project in Hot Springs, SD?

Select your specific project to find the pro for you.

Verified Reviews for Leather And Vinyl Repair pros in Hot Springs, SD

*The Angi rating for Leather And Vinyl Repair companies in Hot Springs, SD is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Leather And Vinyl Repair needs.

*The HomeAdvisor rating for Leather And Vinyl Repair companies in Hot Springs, SD is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Leather And Vinyl Repair needs.

Last update on December 03, 2025

Reviewed in January 2021
His design and ideas are awesome, but sometimes the quality is lacking. My main piece feedback is that they could follow through with little details and repairs to ensure the quality is up to standard. My finished product is great, and I love my kitchen.
Averie custom cabinets
Request a quote
Reviewed in June 2018
We authorized overtime as the AC went out on the Friday before Memorial Day Weekend. The tech showed up and told us there was a major leak. He told us that there was no way to find and repair the leak. He told us the smart money was to buy a new unit. He also said that he could add freon and...
Peterson Heating And Cooling
Request a quote
Reviewed in August 2017
Premier did an outstanding job on our roof. Austin was great to work with, made sure that repairs went smoothly and was always responsive to calls. I would highly recommend Premier Systems.
Premier Systems Inc
Request a quote
Reviewed in October 2013
Took two trips - not surprising when you need strange parts. Repair went quickly and cleanup was thorough. Very pleseant technician.
Quality Appliance Service And Parts
Request a quote
Reviewed in October 2013
Honest and reliable. There were issues with the repair beyond provider's control, and they stood by everything and went beyond the call of duty to make it right.
Rick's Radiator & Heater Repair
Request a quote
Reviewed in October 2013
We trust Ben Fish Tires for quick, reliable and trustworthy service every time we change, rotate, or repair tires, including some farm equipment. The service department also works on brakes, alignment, etc. My father has trusted them for decades.
Ben Fish Tires
Request a quote
Reviewed in May 2013
Most of the time we need any repairs done on our vehicles we go to Jan's. We would recommend Jan's to anyone.
Jan's Garage
Request a quote
Reviewed in February 2013
The gentlemen came out as quickly as they could to repair a broken belt on our dryer. They had the work done within a half-hour, were very professional, and charged a fair price. I'm very impressed, and I would have no hesitation to call them again.
TIEDEMAN REFRIGERATION
Request a quote
Reviewed in December 2011
I like their personnel and they are dependable. They have reasonable, competitive pricing. I wouldn't go to anyone else but them, even for collision repair. They are always honest and charge what they say they will.
Knoepfler Chevrolet
Request a quote

Find Leather and vinyl repair specialists in Hot Springs

Schaaf Saddlery & Leather Work

No reviews yet

Schaaf Saddlery & Leather Work

No reviews yet

108 years of experience

Payment expected at time of service. Most credit cards accepted & also PayPal

Wm Brown Holster Co

No reviews yet

Wm Brown Holster Co

No reviews yet

50 years of experience

At Wm. Brown Holster Co., our custom leather products include gunleather for guns of the old west, gun belts, money belts (by the way, John Wayne's gun belt was actually a non-functional money belt, originally made by Bob Brown of Hollywood). Included in our services are fully carved western gun holsters, shoulder holsters, saddles and other fine western leather products which are all handmade by The Maker. Leather goods and Gun-leather.

Leather and Vinyl Repair questions, answered by experts

In general, vinyl flooring resists scratches, dents, and tears, but this can vary from one type of vinyl (and manufacturer) to another. Vinyl flooring has a wear layer that ranges in thickness from 6 to 20 millimeters. This layer offers protection against standard scratches, but vinyl with a thicker wear layer will resist scratches better than those with a thin layer.

Although it isn’t recommended to use more than 1,500 pounds of force per square inch (or PSI) on delicate siding materials like wood and metal, it’s safe to use more than that on surfaces made of stone, cement, and, yes, vinyl. In most cases, you can use up to 3,500 PSI without any problems, though you’ll want to make sure to use a tip with a spray span that better disperses this pressure, like a green or yellow tip.

If there’s minimal buckling and it was caused by minor moisture damage, the planks may lay flat again once you’ve addressed the underlying issue. However, laminate floors that have experienced significant moisture damage won’t lay flat and must be replaced. If the issue only affects one or two boards, you can replace them yourself relatively easily. However, it’s best to call a pro if the problem is more widespread.

Yes, professionals aim to match the existing material and pattern as closely as possible to ensure a seamless look.

Uneven floors often signal structural issues in a home, so taking them seriously is vital. If you buy an older home with slightly uneven floors, check that your inspector thoroughly inspects the foundation to catch any potential issues early. And if you notice that your floors are becoming more uneven over time, call a pro to check your foundation ASAP.

The homeowners guide to home care is here

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Kate Fann
•
Nov 23, 2025Nov 23, 2025
How Much Does It Cost To Ground A House? [2026 Data]
Wondering about the cost to ground a house? Pricing depends on the material of the rod and how much the electrician charges per hour.
Allie Ogletree
•
Nov 25, 2025Nov 25, 2025
How Much Does C-Wire Installation Cost? [2025 Data]
The cost to install a C-wire ranges based on materials and labor, but it only takes an hour or two. Here’s a guide on the project costs to expect.
Melissa Graham
•
Oct 29, 2025Oct 29, 2025
How Much Does Attic Fan Installation Cost? [2025 Data]
Attic fan installation costs vary based on location, fan type, and other factors. Get the cost breakdown for labor, materials, and additional extras so you can work out your budget for this essential home renovation project.
Alison Kasch
•
Oct 20, 2025Oct 20, 2025
What’s the Best 100-Amp Wire Size for Service Panels?
Selecting the right wire size helps your electrical system run safely and efficiently. Find out the correct wire size for 100-amp service panels.
Jenna Jonaitis
•
Oct 22, 2025Oct 22, 2025
How to Read a Micrometer Using Different Units of Measurement
When it comes to precise measurements, you need a precise tool. A micrometer can definitely come in handy, so learn how to read a micrometer here.
Heather Ayer
•
Oct 20, 2025Oct 20, 2025
How Much Does It Cost to Hire an Electrician to Install Outdoor Light?
Wondering who to call for a fast and easy lamppost installation? Our guide covers who should install a lamppost and the general cost for this project.