Get matched with top bathtub restoration pros in Gayville, SD

You're more likely to accidentally crack your plastic tub rather than successfully fixing a hole. You can fix hairline cracks and larger stress cracks with a plastic tub crack repair kit from a home improvement store. You'll need to clean out the tub, apply either the epoxy resin or filler putty compound into the crack, let it dry, and then sand it out.

Depending on your budget, you might consider a new tub as part of your bathroom remodel costs. It could be a good opportunity to update everything after considering all of the bathroom remodel ideas out there.

The difference between resurfacing and refinishing is that refinishing only works on solid surfaces that are in good condition, whereas resurfacing will restore a cracked or worn surface to its original, blemish-free state. Refinishing will leave you with a smooth and glossy surface you can’t get from resurfacing alone. If that’s the look you’re going for, contact a local concrete finishing contractor to achieve it.

Refinishing a bathtub takes about two to four hours, but let the surface set for another 24 to 48 hours before using it again. Once it's set, your tub should last for 10 years or more. Ventilating the bathroom during this time is key for safety. In comparison, it takes about four hours to install a new bathtub.

Reglazing a bathtub can last as few as three years and up to 15 years. With proper application, the recoated surface is as durable as a brand-new tub. Clean your tub properly and avoid using abrasive cleaners to maintain the coating. If the weather conditions were cold or humid during resurfacing or the tub was significantly damaged, the reglazing may not last as long.