Get matched with top wallpaper removers in Edgemont, SD

Rubbing alcohol may help dissolve stubborn wallpaper adhesive that remains after removal, but be sure to apply it carefully to prevent damaging your walls. Apply a small amount using a cotton swab or pad, then gently scrape or wipe the adhesive away.

While you can remove wallpaper yourself, it is a labor-intensive process that risks damaging your walls. Common DIY methods include using a steamer to loosen the adhesive or spraying the paper with a solution of hot water and vinegar or dish soap before scraping. However, steamers can cause irreparable damage if used incorrectly, and the spray-and-scrape method can harm drywall if it gets too wet or you scrape too aggressively. For these reasons, hiring a professional is often the fastest, easiest, and safest option. A pro has the experience and specialized tools to remove wallpaper efficiently without damaging the underlying surface, which saves time and minimizes the prep work needed for your next wall treatment.

If you’re installing new wallpaper and have leftover glue, you can remove unused wallpaper paste from the bucket or pan it’s in by letting it dry. If it’s an oil-based paste, seal it in a plastic bag and throw it in the garbage. Otherwise, toss the leftover wallpaper paste in the trash. Although it’s water-soluble, don’t rinse unused wallpaper paste down the sink because it could dry in the pipes and cause a blockage.

Removing a wallpaper border requires the same process to remove full walls of wallpaper. Clear the area, spray down the surface with your hot water and vinegar solution or store-bought spray, wait 10 to 15 minutes, then scrape it off with a putty knife. Sometimes, border wallpaper lifts easier than larger sheets, so you can just peel it right off the wall by hand.