Best sewer cleaners near Colton, SD

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Regardless of the drain cleaner type you choose to use, they all work through chemical reactions that create heat. Thanks to the heat, the clogged hair begins to dissolve until it is able to be flushed away. To avoid clogs in your drain due to hair, use hair catchers and empty them out after every shower.

Main sewer lines can clog for several reasons. For example, if you regularly dump oil or grease down your drain, it could eventually block your line. Sometimes, tree roots can penetrate and grow inside old sewer pipes, creating a major blockage. Flushing bulky items (like paper towels, diapers, or baby wipes) can also clog your plumbing system.

Your sewer line can get grimy quickly. To prevent sludge buildup in your sewer line, pour a mixture of 1/3 cup of vinegar and 1/3 cup of baking soda down each drain in your home once a month. After about 30 minutes, flush the drain with hot water.

Some plumbers recommend 3/4 cup of bleach instead to clean any germs and bacteria that may build up in your sewer line. But this won’t break down any active clogs, and it cannot be combined with vinegar, as the mixture will create a toxic, hazardous gas.