While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

You may be able to install a garbage disposal on your own, especially if you're handy or have some experience with plumbing. However, if you have any concerns or want to make absolutely sure that the connections are installed correctly, you may be better off hiring a local garbage disposal installer to do the job. 

Whether it's worth repairing your garbage disposal depends on its age and the specific problem. Generally, if the unit is eight years old or younger, repair is a good option. For minor issues like a bad seal or a simple jam, a repair can be inexpensive, sometimes under $10. However, if the motor is broken (a repair that can cost $150 or more) or the unit is getting old, it's often more cost-effective to replace the entire disposal.

When a dishwasher discharges its wastewater, it uses a pump to quickly move a lot of water. If anything in the drain line or the garbage disposal impedes the high volume of water, it will back up into the sink through the drain or the garbage disposal. Following regular dishwasher maintenance tips like clearing clogs, keeping them cleared, and occasionally running the disposal will eliminate the problem.