Top-rated stucco pros.

Get matched with top stucco pros in Aurora, SD

Enter your zip and get matched with up to 5 pros

Need a pro for your stucco service project in Aurora, SD?

Select your specific project to find the pro for you.

Find Stucco pros in Aurora

Stucco questions, answered by experts

To repair damaged exterior stucco, you’ll first remove all loose and crumbling material from the damaged area. You then need to thoroughly clean the area and dampen it to ensure proper bonding. After that, you’ll apply a bonding agent to the repair area, then apply new stucco in layers, allowing for curing time between each layer. The final coat should be textured to match the surrounding stucco pattern as closely as possible. Once fully cured, the repaired area can be painted to match the rest of the wall if needed.

The best tape that works on stucco is the kind made explicitly for stucco surfaces. Look for tape that specifies stucco, masonry, or cement installations. The adhesive usually needs to be thicker and more durable to remain stuck to these rough surfaces.

Costs range from $500 to $2,000, depending on the damage size and texture matching.

The average cost to repair stucco is about $1,600, with projects ranging from $250 for minor fixes to $6,700 for extensive work. The price is often calculated per square foot, typically costing between $60 and $120. Some professionals may charge an hourly rate of $40 to $50. The final cost depends on the extent of the damage, the type of stucco, your home's location, and whether there is underlying damage that also needs to be addressed.

Costs for specific repairs vary:

  • Cracks: $8–$20 per square foot

  • Holes: $250–$450 per hole

  • Water damage: $30–$50 per square foot

  • Chimney repair: $60–$120 per square foot

  • Recoating: $4–$5 per square foot

While you may be able to patch small cracks yourself, it is recommended to call a professional for major repairs to ensure the job is done correctly.

Yes, you can screw directly into stucco. Only do so if the item you are installing is a permanent fixture. Drill a pilot hole into the stucco using a masonry or concrete bit, then drive in the screw with a power drill or screwdriver.

The Aurora, SD homeowners’ guide to stucco services

From average costs to expert advice, get all the answers you need to get your job done.