Get matched with top pressure washers in Alcester, SD

Yes, acid washing can change the appearance of the original brick stain color. It removes dirt, and efflorescence, often revealing the brick's original color and restoring its natural beauty. However, if not done carefully, it can also cause slight variations in color due to the cleaning process.

It depends on the type of surface, but if you’re preparing to pressure wash a driveway, you’ll start by using a broom or leaf blower to get rid of dirt, leaves, and other debris. Then, move any nearby items (like outdoor furniture and potted plants) and cover in-ground plants with a tarp or plastic sheet. After that, you can apply degreaser spray or another pretreatment solution to any stains and scrub them with a stiff brush before pressure washing.

How often you should pressure wash your house is mainly dependent on where you live and how dirty the area gets. For example, you may want to clean the exterior of your house two or more times a year if you live in an area with a lot of rain and snow. On the flip side, you may only need to pressure wash your outdoor patio furniture every few years as it starts to lose its luster (or if you forget to cover it before a big storm).

On average, pressure washing a house can take anywhere from 30 minutes to three hours. The time frame to pressure wash or power wash your home, fence, or other property depends on the size of the project and the complexity and accessibility of the areas that need cleaning. Part of the time required to complete the job includes setup and removal of equipment needed. A two-story house with a steep roof may require working from scaffolding or a ladder, likely adding to the time required to finish the project.