No, but it’s common that they do. Gravity furnaces weren’t terribly efficient so wrapping either the ductwork in asbestos, the furnace itself, or both, was something done regularly. This allowed the system to retain more heat. At the time, this greatly enhanced the efficiency of the furnaces but it wasn’t until later that we became aware of just how carcinogenic and dangerous asbestos could be.

Vermiculite insulation that comes from a particular mine before 1990 is likely to contain asbestos. This is particularly true in the U.S. However, not all types of vermiculite insulation contain asbestos. Since you can't detect the presence of asbestos without special equipment, it's best to assume that the insulation contains the dangerous mineral and to either leave it alone or hire a professional to handle it.

Asbestos can be found in many building materials, especially if the materials were installed more than 20 years ago. Asbestos-containing materials (ACM) can include:

• Acoustic ceiling tiles

• Furnace insulation

• Home appliances

• Fire-retardant clothing

• Cement pipe

• Pipe insulation

• Wall and ceiling insulation

• Vehicle brake pads

• Vinyl flooring

• Sprayed acoustic ceilings

• Stove insulation

• Patching compounds

• Textured paints

• Roofing shingles

• Siding

Since DIY asbestos removal isn’t the best option to save money, there are other steps that you can take to help cut costs when dealing with this project. After speaking with your asbestos removal expert, discuss if encapsulation is an option. If it is, you can save between 15% to 25% on overall project costs over demolition and disposal. In addition, when speaking with your professional, discuss if there are any tax credits available for your removal project. Finally, check with your homeowner’s insurance to see if any removal costs might be covered. However, be aware that this is usually only applicable if the asbestos is due to a covered incident, like a tree falling into your roof.