Top-rated floor polishers.

Get matched with top floor polishers in Batesburg-Leesville, SC

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Batesburg-Leesville, SC?

Select your specific project to find the pro for you.

Find Floor polishers in Batesburg-Leesville

Clean Right Southeast, LLC
New to Angi
Clean & Polish Flooring - For Business

Serving Batesburg-Leesville, SC and surrounding areas

Approved

In business since 2006

Free estimates

Credit card accepted

From humble beginnings Clean Right Southeast, LLC has grown from a “small operation” into an organization that boasts a modern range of products and services to accommodate the ever changing needs of our clients and the environments in which they work in. \n\nOur wide range of services includes: window cleaning, carpet cleaning, pressure washing, post-construction cleaning and tile and grout cleaning. Clean Right Southeast, LLC is diversified to handle all your requirements in a professional, safe, and efficient manner yet focused enough to care about your individual needs. Clean Right Southeast, LLC strives to provide the best and most efficient service possible at all times-on time every time\n

...
Showing 1-10 of 52
Floor Polishers questions, answered by experts

Yes, you can polish an old cement floor. However, be aware that the first pass with the concrete grinder may reveal a few surprises and imperfections. You may also have to contend with the consequences of previous floor coverings, such as tile or carpet, which can leave a pattern in the concrete. Old concrete is more likely to produce uneven results if you want to use a dye or other coloring.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

Using too much soap or floor cleaner can leave your laminate floors looking dirty or cloudy after mopping. Only use a teaspoon of soap or cleaning solution in a gallon of water. Additionally, always be sure to sweep or vacuum laminate floors before mopping to ensure you pick up dried grit, hair, and dust that can be harder to catch with a wet mop.

Services typically take 2-4 hours, depending on the area size and floor material.

Most DIY floor cleaners don’t require rinsing, but you’ll want to make sure you don’t add too much dish soap or oil to the cleaner to avoid having to rinse it after cleaning. For non-wood floors, mix 8 parts warm water, 1 part vinegar, and 1 part baking soda with a few drops of dish soap. For wood floors, use olive oil in that same mixture instead of the vinegar. You can let these solutions air-dry after cleaning your floors with them, although you should manually dry your floors if they aren’t waterproof.

The Batesburg-Leesville, SC homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.