Get matched with top holiday decorators in Andrews, SC

The cost for professional holiday light installation averages around $430, with a typical range of $220 to $675. However, prices can be as low as $100 for simple projector setups or exceed $1,200 for extensive displays. The total cost depends on factors like the display's complexity, your home's size, labor rates in your area, and the type of lights used. For example, installation on a small, one-story home may cost $250 to $600, while a multi-story home over 4,000 square feet could cost $500 to $1,800. Costs can also be broken down by location (e.g., high roofs at $3.50–$6 per linear foot) or by the type of light strand, with prices ranging from $4 for basic incandescent strands to over $60 for color-changing LED strands.

There aren’t many alternative methods to hanging Christmas lights on fascia without using clips. But if you don’t have fascia clips to hang your Christmas lights, you can use clothespins in a pinch. To do this, hold the strand of lights in place and clip it in place with the clothespin. Using nails or staples is never a good idea, as they can damage your fascia.

How many string lights can be on one outlet depends on a number of varying factors, including the total wattage of your circuit, the type of lights, the energy needs of the lights, and cord specifications. It’s better to play it safe here to protect your circuit, so figure out the max wattage of your circuit, compare that to the lights, and move on from there. Generally speaking, LED string lights require less energy than incandescent bulbs, translating to a higher number of lights per circuit. 

In the Christmas days of yore, people braved winter weather to staple or tack their Christmas lights onto their rooftops or nearby surfaces like the fascia boards. Problems quickly emerged with that approach. Damage to the roof, even small marks from staples, provides entryways for moisture and similar issues that can hasten roof rot, wear, and associated leaks. Plus, some homes had tough fiber cement boards or other materials where staples and screws didn’t work.