Get matched with top gas log pros in Abbeville, SC

Shut-off valves, like any other piece of metal hardware, can corrode, age, get worn down, and eventually break or rust into place. Occasionally spray your shut-off valve with WD-40 to stall it from rusting. If it really gets stuck, a wrench and WD-40 will usually do the trick, but you will need to call a plumber if it’s completely unmovable.

The effect a gas fireplace has on your gas bill will depend on how often you use it, the size of the rooms you’re heating with it, and the BTUs of the fireplace itself, but generally speaking, it should only cost a few cents an hour to run it when it’s on. It will consume minimal energy when it’s “off” if you have a pilot light running constantly, but some modern gas fireplaces don’t require a constant pilot light.

In most cases, yes, it’s safe to light a gas water heater manually, but you should shut the gas off first, open a window, and let the space air out for about 10 minutes. Modern water heaters shut the gas off entirely if the pilot light goes out, but airing out the area beforehand is good practice and will ensure it’s safe to relight your pilot light manually. Just make sure you turn the gas valve to “pilot” before lighting. If the light keeps going out or won’t light at all, call in a professional.

In some ways, yes, and in some ways, no. As for how they’re the same, propane and gas both burn via the same process, combustion, and at the same temperature, around 3,600 degrees Fahrenheit. The difference is that propane produces more heat per unit than gas. One cubic foot of propane contains 2,516 BTU, while one cubic foot of gas contains 1,030 BTU.