Get matched with top fire pit installation pros in Pascoag, RI

In some cases, you can use a fireplace once the insert has been removed. However, before burning a fire, you must have a professional inspect it and the chimney to make sure they're functioning properly and no damage has occurred from removing the insert. That’s because using a fireplace without an insert could create fire hazards due to issues with airflow and heat dispersion, depending on the fireplace design and material. A professional can advise on whether you should make certain repairs or modifications before using your fireplace as an open hearth.

The best way to store firewood is outdoors and away from your home, shed, or garage. Stacking wood against your house can be a fire hazard and attract unwanted pests. Store your firewood under a shelter where it's protected from rain and snow but still exposed to sunlight and open air. You can lay a tarp on top to help keep moisture out.

Certified fire door inspectors should inspect fire doors. These professionals receive training to specifically assess the condition, functionality, and compliance of fire doors. They often hold credentials from groups like the Door and Hardware Institute (DHI) or the International Fire Door Inspector Association (IFDIA). While fire marshals won’t usually do hands-on inspections, they’ll check that doors are being maintained properly during routine safety audits. If a building relies on fire doors for code compliance, it needs someone who understands the details—the difference between a cosmetic issue and a safety failure—and standards to sign off with confidence.

Yes, fire extinguishers eventually expire. However, the good news is that a properly stored fire extinguisher can last a decade or longer. They don’t have an expiration date on the canister, but you can check the manufacturing date on the “UL” nameplate near the classification information. Maintenance will also give your fire extinguisher longevity. Check the gauge at the top of the extinguisher every month. You'll want to make sure the gauge needle is in the green section, and if a hose or nozzle has been used or damaged, you need to replace it.