Best pre-made cabinet pros near Yardley, PA

In most cases, it’s more affordable to refinish your cabinets than replace them, with refinishing costs averaging $3,000 and replacement costs around $9,000. However, there are some instances in which it’s better to replace your cabinets, like if they’re an outdated style, badly damaged and beyond repair, or a sub-par material, like fiberboard. In all other cases, it’s usually a better idea to have a professional refinish them to save money and restore their original condition.

It depends on whether you buy pre-made stacked cabinets or construct them from scratch. If you build added cabinets from scratch, you can expect it to take several hours or days to build each one and then another two to three days for installation. Then, after painting your new cabinets, you should allow a few weeks for the paint to dry thoroughly before installing them over your existing cabinets.

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

It is generally more cost-effective to purchase stock or semi-custom cabinets than to have them custom-built. The best option depends on your budget and customization needs.

Here is a breakdown of the average costs per linear foot:

• Custom Cabinets: $500 to $1,200. The final price is influenced by factors like materials, size, and design complexity. For example, a basic slab cabinet door might cost $60 to $70 for materials, while a more intricate mullioned glass inset panel door can range from $100 to $200 per door.

• Semi-Custom Cabinets: $150 to $700.

• Stock Cabinets: $100 to $400. These are pre-built and the most affordable option, but they offer limited customization and may not be suitable for rooms with unusual shapes or high ceilings.