Best window pros near Tullytown, PA

Your new windows may let in more noise than your old windows because they are not the right size or they were installed improperly. Improper installation, or choosing windows that are too small for the opening, can create gaps around the window that let in noise.

Another factor could be the STC and OITC ratings. If your new windows have lower ratings than your old windows, this means they have lower performance when it comes to dampening noise from the outdoors.

The rough opening refers to the framed space in the wall where the window will be placed. That means the full size of the space will be filled with both glass and frame once the new window is installed. For a standard window, a rough opening adds 1/2 inch to 3/4 inch to both the length and width.

No, windows cannot be made 100% soundproof. Even the most advanced setups still allow some sound to pass through because windows are designed to let in light and are not completely sealed from the outside. While you cannot achieve complete silence, significant noise reduction is possible, with some noise-reduction windows blocking up to 95% of outside noise.

The goal is to minimize air gaps, add mass, and reduce vibration. To block out as much noise as possible, consider hiring a professional to install new double-pane, triple-pane, or laminated windows. You can further enhance soundproofing with airtight seals, glass inserts, shutters, or sound-dampening curtains. With the right upgrades, you can block out traffic, neighbors, and other city noise to a much quieter level.

When specifying window sizes, manufacturers use a standard four-digit code system. The first two numbers represent window width, and the last two represent window height. For example, a window with a code of 2917 has dimensions of 2 feet, 9 inches wide by 1 foot, 7 inches high. Windows with even dimensions include zeros as placeholders. For example, a window that is 5 feet wide by 2 feet high would have a code of 5020.