Get matched with top fencing pros in Tionesta, PA

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

Galvanized metal, vinyl, and composite fences are known to be the longest-lasting options, often surviving for over 30 years with proper care. Metal fences, including galvanized chain link and aluminum, can look great for decades because the galvanization process adds a protective coating that resists weather and pests. Similarly, vinyl and composite materials are resistant to pests and can withstand harsh weather for many years. In comparison, a typical wood fence lasts about 15 years, and a standard vinyl fence has a lifespan of 20 to 30 years.

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust. 

If 20% or more of your fence is damaged, pros will often tell you that it’s a better use of your money to replace the fence entirely. Severe rotting and insect damage always call for a replacement. However, if you’re just dealing with a few loose posts or a little bit of mildew growth, you can repair the fence.