Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Palmerton, PA

Q: How do size and material choices impact the expense of building a metal carport?

• <div><p>Costs depend on size, material type, and additional features like enclosed sides or storage.</p></div>

Q: How do I maintain custom metal structures?

• <div><p>Regular cleaning, rust prevention treatments, and protective coatings extend lifespan and appearance.</p></div>

Q: What is the best material to frame an outdoor kitchen?

• <div><p>A few materials are most commonly used when it comes to building a frame for an outdoor kitchen: wood, steel, and concrete or brick. While there&rsquo;s no best option overall, each material is better suited to different needs. Concrete and brick are typically more customizable than other options, but aren&rsquo;t as resistant to inclement weather as steel. Wood is the most affordable pick, but it is more susceptible to rot, mildew, and heat than the others.</p></div>

Q: How do you make stainless steel shine?

• <div><p>To restore an appliance&rsquo;s shine, clean the surfaces using a natural cleaning solution, and then use a mineral oil or olive oil and a soft microfiber rag to polish stainless steel surfaces in the direction of the graining. A little goes a long way, so dip the cloth in a small amount of oil. If you have any excess, continue with a dry part of the microfiber cloth to soak up any remnants.</p></div>

Q: How many metal sheets will I need?

• <div><p>The average roof requires about 17 metal sheets, but that varies according to house size and roof style. Each roofing sheet takes about five minutes to measure and cut, though this depends on your level of experience. If your roof has a steep slope, gables, and skylights, for example, it may require extra sheets to account for waste. Roofs with a steep slope over 3:12 typically require more sheets because the pitch adds extra inches. How much exactly you will need depends on the height versus the width of the roof. If you are unsure of the calculations, check with a local roofing professional.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Palmerton, PA?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Palmerton, PA

*The Angi rating for Metal Fabrication And Restoration companies in Palmerton, PA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Palmerton, PA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on November 17, 2025

Reviewed in July 2024
We are very pleased with Adams A&E. They were punctual, professional and experienced. They came in with all the equipment and staff to get the job done quickly and safely. They cleaned up the area and were on their way, We also felt the price was reasonable. Would definitly recommend these guys....
Adam's Earth Farm and Environmental Services, LLC
Request a quote
Reviewed in August 2014
The owner gave an estimate and promised he did the work personally because he had previously experienced when using sub-contractors or employees the work got sloppy. He did not do the work though, he subbed the job out to employees he found on Craig's list, therefore had no idea of the quality...
Platinum Pro Painting
Request a quote
Reviewed in December 2013
The technician was very knowledgeable, pleasant and professional. He had repaired one of my gas furnaces previously and did a very good job with no problems since that work. I usually ask them to send the same technician when I call. Diagnosed the problem with one of my central AC units....
Edwin Stipe Inc
Request a quote
Reviewed in November 2013
Craig did a great job. The chairs look wonderful. I originally only had 2 chairs done, just in case I didn't like the fabric I chose. The chairs were perfect so I had the other 6 recovered. Craig is very personable and did a great job! I would definitely recommend him and have him...
Kauffman's Upholstery Inc
Request a quote
Reviewed in October 2012
My mother had an old chair that was a favorite of hers. The chair rested on a metal pedestal and the chair separated from the pedestal. I did not think it could be fixed, but since it was her favorite I decided to give it a try. When I took the chair to Schaffer's he looked at it...
Schaffer's Welding
Request a quote
Reviewed in September 2012
Service call was three days from call.... Prompt and efficient diagnosis of problem... Electricity restored... New outlet and completed in one hour... Doesn't get much better...
WEST SIDE HAMMER ELECTRIC
Request a quote
Reviewed in August 2012
we needed a pen for our 2 dogs asap. the salesman was very helpful with finding the right product for our use. very accomodating, quick completion, sturdy fence, workmen cleared shrubbery and relaid a few flat stone pavers to complete walk through gate to yard. also, made a very tight fit...
American Fence & Flag
Request a quote
Reviewed in October 2008
The rest of my clothes seemed clean and pressed, but I am pretty unhappy about them messing up my shirt and not even bothering to call me.
CLASSIC CLEANERS
Request a quote

Find Metal fabricators and restorers in Palmerton

Bailey's Welding & Mechanical

5.00(

)

•Approved Pro

Bailey's Welding & Mechanical

5.00(

)

•Approved Pro

Customers say: Quick response

Recommended by 100% of Angi customers

10 years of experience

Bailey's Welding & Mechanical is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

"he will do whatever is necessary to make sure you are happy with the work he has done."

Tony W on January 2020

"he will do whatever is necessary to make sure you are happy with the work he has done."

Tony W on January 2020

Get matched with top metal fabricators and restorers in Palmerton, PA

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Palmerton, PA?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Palmerton, PA

Find Metal fabricators and restorers in Palmerton

Bailey's Welding & Mechanical

Bailey's Welding & Mechanical

Erik Reichard

Erik Reichard

EMI SERVICES

EMI SERVICES

Ruck Metal Art

Ruck Metal Art

Witmans Welding and Fab

Witmans Welding and Fab

Rampage Welding & Repair LLC

Rampage Welding & Repair LLC

CJW Construction

CJW Construction

Schadler Industrial

Schadler Industrial

Protex powder coating and hydrographics

Protex powder coating and hydrographics

Soul Customs Metal Works

Soul Customs Metal Works

The Palmerton, PA homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Palmerton? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Palmerton Metal fabrication and restoration services on Angi who specialize in any of these tasks

Find Pros for other jobs in PalmertonIf your Metal fabrication and restoration services job is complete, use Angi to find quality Pros in Palmerton for any number of jobs.