Is a wood or steel beam better in a home?

• <div><p>A steel beam is stronger than a wood beam and requires fewer vertical supports underneath, which means it’s a better option for larger structures or if you want an open space under your home that doesn’t have posts as obstructions. However, <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">steel I-beams cost</a> more than wood ones, and they can be difficult to install retroactively, as getting them into the basement area can be challenging, if not impossible.</p></div>

Why should I pick steel for my new support beam?

• <div><p>You should pick steel for your new support beam for a few reasons. While steel is more expensive than other materials, such as laminated veneer lumber or glulam, it offers the following benefits:</p><ul><li><p>Fire-resistant</p></li><li><p>Unaffected by pests</p></li><li><p>Longer-lasting</p></li><li><p>Stronger against water damage (when galvanized against rust)</p></li></ul><p></p></div>

Get matched with top welders in Jefferson, OR

Q: Does steel framing increase home value?

• <div><p>Using a steel frame may raise the value of your home. Steel is more heat resistant, has better longevity, and doesn&rsquo;t need any upkeep compared to traditional wood. You can also customize a steel build a little easier than other materials like brick, concrete, and vinyl&mdash;which have trouble bending and adapting to renovations.</p></div>

Q: How much does it cost to hire a metal fabrication professional?

• <div><p>Professional metal fabricators usually charge around <b>$70 per hour</b>. Three of the largest cost factors are the size and complexity of the project and the price of materials. The type of metal can impact the cost as much as the intricacy of the metal fabrication you want done. Another cost factor is your geographic location, as labor and materials can vary widely depending on the cost of living where you live. </p></div>

Q: Do welders need to be licensed or certified?

• <div><p>Some states require welders to be licensed and certified, while others don&rsquo;t. However, it&rsquo;s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they&rsquo;re less likely to make a mistake that could be detrimental to your home. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">state licensing tool</a> to determine whether your potential hire has a welding license.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Jefferson, OR?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Jefferson, OR

*The Angi rating for Welding companies in Jefferson, OR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Jefferson, OR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on December 04, 2025

Reviewed in March 2022
Excellent costumer service! He helped me weld on my pressure washer tire that broke off. He was very quick and professional. Itâ s nice having someone in the area who can help with odd jobs like this.
Curtis Manufacturing and Construction, LLC
Request a quote
Reviewed in July 2019
The electrician was prompt ( a little early in fact). He was polite, professional, and also a welder which meant he understood exactly what I needed. He was very fast and completed the job in less than 2 hours. The outlet installation was neat and placed exactly where I wanted it. If I ever need...
On Electric
Request a quote
Reviewed in February 2017
Fred came out and gave me an estimate. He looked at the problem, asked me what kind of solution I wanted, and offered his suggestions/costs. I decided to make the opening 10' and opted for a powder coated latch. Also looked at the broken post on the alley fence. He told me he would get a bid to...
F&W FENCE CO
Request a quote
Reviewed in July 2014
I purchased a freezer several months ago. It failed. Waited all day for a repairman, never came, though after phone calls that left me feeling concerned/frustrated with owners attitude there where no guarantees of when or if a repairman would show up. NO statement about if they could even come...
JL'S Appliance
Request a quote
Reviewed in December 2010
He had to go through the wall and remove an old shower faucet handle, which appeared to be welded on. He completed this neatly and efficiently. All the old hardware was removed and new installed. The price was very reasonable. He charges a flat rate, covering a number of things. He could not...
INDEPENDENT PLUMBING
Request a quote
Reviewed in June 2007
Milgard really stands behind their warranty. Somehow a weld broke in the sliding door and a leak did some damage inside the house. A representative came out and assessed that they not only need to take care of the door but he also said that they would take care of the other damage caused by the...
MILGARD WINDOWS
Request a quote

Find Welders in Jefferson

Fabulous Fabrication and Welding

5.00(

)

•Approved Pro

Fabulous Fabrication and Welding

5.00(

)

•Approved Pro

Customers say: Quick response

Recommended by 100% of Angi customers

57 local quotes requested

Fab Fab offers skilled metal fabrication and repair, and specializes in creative solutions with modern techniques. We are a one stop shop for all your small and medium custom metal fabrication projects. With a focus on detail, durability, and aesthetics, our work will provide beauty and function for decades to come. From concept to completion, we can guide your project to success. Licensed, bonded, and insured in Washington and Oregon. OR CCB: 251172 WA L&I: FABULFW765LC

"Working with Alex was a fantastic experience from start to finish. He was responsive in communication, understood our modification needs, and delivered precise measurements and a high-quality finished product. We would definitely turn to him again for any future fabrications or welding. Highly recommended! Thank you, Alex!"

Tiffani S on October 2024

"Working with Alex was a fantastic experience from start to finish. He was responsive in communication, understood our modification needs, and delivered precise measurements and a high-quality finished product. We would definitely turn to him again for any future fabrications or welding. Highly recommended! Thank you, Alex!"

Tiffani S on October 2024

Get matched with top welders in Jefferson, OR

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Jefferson, OR?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in Jefferson, OR

Find Welders in Jefferson

Fabulous Fabrication and Welding

Fabulous Fabrication and Welding

XFab

XFab

Js welding

Js welding

Toms metal fab

Toms metal fab

Mattox welding

Mattox welding

Valley Welding and fabrication

Valley Welding and fabrication

Diego Welding

Diego Welding

CTR Corp

CTR Corp

Allstar Fabrication L.L.C

Allstar Fabrication L.L.C

Pushed Out Projects

Pushed Out Projects

The Jefferson, OR homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Find Welding Pros in other cities near youNot finding what you are looking for in Jefferson? Check surrounding areas for Welders.

Which Welding task are you tackling?Find Jefferson Welding services on Angi who specialize in any of these tasks