Top-rated sandblasting pros.

Best sandblasting pros near Hermiston, OR

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Hermiston, OR?

Select your specific project to find the pro for you.

Top-Rated Sandblasting pros in Hermiston - Updated Nov 2026

Avatar for Deluxe Finish Painting LLC.
Deluxe Finish Painting LLC.
5.0(
3
)
Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Hermiston, OR and surrounding areas

In business since 2019

Free estimates

Credit card accepted

"Alex was right on time every time that we made an arrangement. He kept in touch by text very efficiently. He did the job very well and stayed at my house until the job was finished, about 6pm at night. He gave me a set price and did not charge by the hour. He cleaned up well after painting."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+38

Recommended by66%of homeowners
Sandblasting Services FAQs, answered by experts

Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.

The disadvantages of sandblasting are noise, mess, and risk. Sandblasters are louder than chainsaws and spread debris on the ground and through the air. Let your neighbors know that you're sandblasting so they can prepare. Sandblasting can damage your property if not done properly, so thoroughly vet any pros you talk to before hiring.

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

The Hermiston, OR homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.