Top-rated floor polishers.

Get matched with top floor polishers in Halfway, OR

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Halfway, OR?

Select your specific project to find the pro for you.

Find Floor polishers in Halfway

Floor Polishers questions, answered by experts

If you have waxed floors or floors with a penetrating stain or oil, you can shine them up with some more wax and a cloth or floor buffer. After cleaning the floor thoroughly, apply wax to the floor in small sections and use a clean, dry cloth or towel to buff it until it shines. You can also use an electric polisher, which is especially handy for large floors.

Commonly used in garages, epoxy is a synthetic resin coating that goes over the top of concrete surfaces. If you’re deciding between polished concrete and epoxy flooring, the best choice depends on your needs and personal preference. Epoxy is durable and highly customizable, while polished concrete tends to require less maintenance. They’re both long-lasting with similar price points, and professional installation is recommended for each.    

The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.

The cost for professional floor cleaning is $250 on average. This cost can range from $100 to $1,500, depending on the type of flooring and its square footage. 

For example, natural stone flooring requires specialized techniques and care, so you'll spend closer to the higher end of the cost range. The cost of cleaning tile and grout is more cost-effective, where you'll pay an average of $0.50 to $3.50 per square foot.

If you’re cleaning or repairing laminate floors, avoid anything abrasive like heavy-grit sandpaper or steel wool. Because the image layer is protected by a topcoat, the image layer is more vulnerable to scratches and damage if the topcoat is damaged. And if the image layer is scratched, it can reveal the wood fiber core.

The Halfway, OR homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.