Best countertop and backsplash pros near Tecumseh, OK

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

No, in most cases, you do not have to remove your countertops to reface cabinets. Since refacing primarily involves updating the doors, drawer fronts, and exterior surfaces, your existing countertops can usually stay right where they are, making the process quicker and less disruptive. However, if your counters prevent the access needed to remove doors and drawers, they may need to be temporarily removed. It's best to consult with a professional cabinet contractor to assess your specific kitchen layout during an estimate.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.

No, you should not put hot pots or pans directly on epoxy countertops, as this can cause permanent damage. While epoxy is heat-resistant, it is not fully heatproof. Epoxy countertops can typically withstand temperatures ranging from 135°F to 300°F, but cookware directly from a stove or oven can reach much higher temperatures (300°F to 500°F). Placing an extremely hot item on the surface can cause it to melt, soften, or discolor. To protect the integrity and appearance of your countertops, always use a trivet, hot pad, pot holder, or other heat-resistant barrier before setting down hot cookware.