Top-rated insulation pros.

Get matched with top insulation pros in Ninnekah, OK

Enter your zip and get matched with up to 5 pros

Need a pro for your insulation service project in Ninnekah, OK?

Select your specific project to find the pro for you.

Find Insulation pros in Ninnekah

Avatar for Weatherization Experts Inc
Weatherization Experts Inc
4.7(
299
)
Spray Foam Insulation - InstallBlown-In Insulation - Install or UpgradeBatt, Rolled or Reflective Insulation - Install or Upgrade+2 more

Serving Ninnekah, OK and surrounding areas

Approved

In business since 1998

Free estimates

Warranties offered

"The project went well. The ladder install made a big mess but all was cleaned up. Decking install was good but area had to be reduced due to obstacles but still turned out to be plenty. Insulation was blown in and that also went well. I had some low gable vents that leaked the insulation that was blown up to them. I don’t think this could have been avoided, but that leakage blew back inside the back door and made a mess in the laundry room and kitchen. They offered to come back and clean this up but I went ahead and did the cleanup myself so it didn’t get tracked throughout the house. All things considered, I am very pleased with the job they did."
Leaky Duct in Attic
POOR SOFFIT BLOCKING
FINISHED WORK
RECESSED CAN LIGHT
8 neighbors recently requested a quote
Recommended by96%of homeowners
D.T.S Spray Foam Insulation
3.5(
3
)
Blown-In Insulation - Install or UpgradeSpray Foam Insulation - InstallBatt, Rolled or Reflective Insulation - Install or Upgrade+1 more

Serving Ninnekah, OK and surrounding areas

Approved

In business since 2016

Free estimates

Customers say: Quick response

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

Response time5 hrs
45 neighbors recently requested a quote
Recommended by100%of homeowners
Avatar for Hometown Spray Foam, LLC
Hometown Spray Foam, LLC
New to Angi
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallSpray Foam Insulation - Install

Serving Ninnekah, OK and surrounding areas

Approved

In business since 2021

Free estimates

Credit card accepted

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business! Book with us online or feel free to give us a call today!

Our Work
Our Work
Our Work
Our Work
Our Work

+4

Response time7 hrs
Avatar for Milo Insulation of Oklahoma - OKC
Milo Insulation of Oklahoma - OKC
4.9(
72
)
Batt, Rolled or Reflective Insulation - Install or UpgradeBlown-In Insulation - Install or Upgrade

Serving Ninnekah, OK and surrounding areas

In business since 2000

Free estimates

Warranties offered

"Everyone from sales to installation is great to work with. Friendly, professional, and genuinely interested in doing what was right for our home. Chris and his crew removed old insulation, sealed around vents, and installed new MILO insulation. We had 2500 square feet of attic space that the job took 2.5 days to complete. The entire team was respectful of our property, everything was cleaned up after each day. Chris was excellent to make sure everything was completed properly, any concerns he took care of them. Highly recommend Milo Insulation."
New MILEX Insulation
New MILEX Insulation
New MILEX Insulation
New MILEX Install
New MILEX Install

+18

Response time3 hrs
Response rate100%
Recommended by93%of homeowners
Avatar for Tri City Heating and Cooling
Tri City Heating and Cooling
4.9(
49
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Ninnekah, OK and surrounding areas

In business since 2009

Free estimates

Emergency services offered

"Jason from Tri City heat and air was a super nice and completely upfront, tell it like it is, kind of guy, came in, got down to business, helped me save some cash, got the job done very quick, and was on his way. I would recommend him to any and everybody."
5 Ton Lennox
Condenser
Up close pic of guttering
Furnace and evaporator
Response time6 hrs
Recommended by97%of homeowners
All Pro Insulation
5.0(
7
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Ninnekah, OK and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Can't say enough good about this company. They were very quick to respond to my inquiry and the owner continued to maintain that same level of contact throughout the entire project. In my experience in dealing with contractors this is a rare and admirable quality. It is also indicative of their entire business mantra. I would not hesitate to use them again and definitely recommend them if you are looking for a competent and professional insulation company."
Loose fill fiberglass insulation
retro fit attic insulation
dense pack wall insulation
loose fill attic insulation being installed
Response time1 day
Response rate87%
Recommended by100%of homeowners
Rapid Insulation Pros
5.0(
5
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Ninnekah, OK and surrounding areas

In business since 2021

Free estimates

Credit card accepted

At Rapid Insulation Pros we pride ourselves on being the best Insulation company in the Oklahoma City area. \nWe've built an excellent reputation for customer satisfaction by providing quick estimates, a great attention to detail, and competitive pricing. \nBeing a screened and approved professional gives you the peace of mind you need to allow us to give your home the attention it deserves. Call us today and let's get started!\n

Response time9 hrs
Recommended by100%of homeowners
Showing 1-10 of 36
Insulation questions, answered by experts

The R-value is a rating that measures an insulation's thermal resistance—in other words, how well it insulates. A higher R-value provides more protection for your pipes, and all pipe insulation materials should have an R-value listed on the product description or label. Each insulation type has its own R-value, which typically falls between one and five for most pipe insulation. When making a selection, Energy.gov recommends choosing a pipe wrap that is at least one inch thick, and the International Code Council (ICC) suggests choosing a material with an R-value of at least 3.

If you need to insulate behind finished walls, the best option will likely be to have an insulation professional install blown-in insulation. The installation requires small holes cut in your wall, after which the installer can blow loose-fill insulation into the void. After the installation, you’ll have minor drywall patching, which shouldn’t cost more than $100. Compared to ripping down the existing drywall, using a different type of insulation, and replacing and finishing the drywall, this should save you hundreds or even thousands, depending on the size of the room you’re insulating.

Bubble wrap is better for moving since it can be cut to size, whereas dish foam comes in precut sheets that are harder to manipulate. However, if you’re packing items like dishes, wine glasses, picture frames, or mirrors, dish foam will protect them better. Ensure you measure your box beforehand so you know what size dish foam to purchase. 

The life span of insulation is between 20 and 100 years. At that time, existing insulation can fall victim to gravity, resulting in compression, which reduces its insulating protection or R-value. If you can't simply add more insulation over the existing material, removing the old to increase the effectiveness of the new can reduce your energy bills and make the project worth the time and money investment.

If you have bubble wrap lying around the house and you don’t care about the odd look, taping bubble wrap over a window is a very affordable way to insulate it. Another inexpensive option for insulating windows is to add new caulk around the glass. This step quickly cuts down on air drafts for older windows, and a tube of caulk only costs a few dollars. Adding plastic shrink film around the glass is another cost-effective option. You can purchase a kit of plastic film for a few dollars per window.

The Ninnekah, OK homeowners’ guide to insulation services

From average costs to expert advice, get all the answers you need to get your job done.