Get matched with top pressure washers in Mooreland, OK

The answer to how often you should pressure wash your house is the same no matter whether your siding is wood, metal, or vinyl. Plan to do a project like this once a year with occasional hand cleanings in between to remove unexpected dirt—like debris from an especially violent storm or droppings from birds flying overhead.

Though bleach is a great way to kill mold and mildew around the house, you should never, under any circumstances, use bleach in a power washer. Bleach is a potent chemical that will destroy the pressure washer from the inside out. If you’re worried about killing mold and mildew, you should instead hire a pro who will use a safe but effective cleaning agent when pressure washing your home.

It’s always best to check the manufacturer’s instructions for your pressure washer to see what detergents they recommend. If you’re caught short and looking for an at-home solution, you could try using trusty dish soap to help keep your siding sparkling. However, always use a dilute solution, as concentrated dish soap can clog the machine. One tablespoon of dish soap per 1.5 quarts of water is a good place to start.

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray.