Get matched with top pressure washers in Marlow, OK

Hardscaping is made to withstand the elements, but it still needs regular cleaning as well as maintenance like weeding, replacing broken pieces, removing mold or mildew, and more. Use an appropriate cleaner for the hardscaping material with a stiff brush to remove dirt and other material, or use a pressure washer for a deep clean. Staying on top of maintenance can alert you to any problems with your hardscaping that will need repair or replacement.

Always use a soft washer to clean your gutters—you can also clean them by hand. It’s tedious work, but it keeps your gutters intact. Pressure washers have PSIs of 1,500 or even more, which is strong enough to cause damage to your gutters or to knock shingles off your roof. When your gutters are damaged, your home is more susceptible to moisture, which can lead to mold and mildew problems.

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.

Combining power and soft washing is a great way to ensure that all surfaces, both fragile and not, get the attention they deserve. Start by power or pressure washing durable materials like vinyl siding and concrete pavement or driveways, then switch the tips on your machine and finish up by soft washing the more delicate elements, like shutters and front doors, for example.