Get matched with top countertop and backsplash pros in Bethany, OK

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.

Any surface, including a waterfall countertop, can last decades based on a few things. First is the chosen material. For instance, quartz and granite are more durable and long-lasting than marble or concrete. Proper care also plays a key role. Regular cleaning and sealing, if required, will help any counter resist stains and damage over time.

Most recycled glass countertops are nonporous, so they don’t require sealant. There is, however, one major exception. If your recycled glass countertop contains a cement binder, it’ll require an additional layer of protection. Seal these countertops once or twice a year. Use a concrete sealant and finish it with a food-safe wax for a gorgeous and shiny finish. Otherwise, just clean the countertop regularly and always use a cutting board.