Get matched with top ceramic tile pros in Philo, OH

The average cost for tile installation is about $2,000, with a typical price range between $500 and $6,500. On a per-square-foot basis, you can expect to pay between $5 and $45 for installation.

Several factors influence the total cost, including:

• Installation Site: Costs vary for different areas. Common project costs are: kitchen floor ($870–$6,100), countertop or backsplash ($500–$3,000), bathroom floor ($300–$2,400), or shower wall ($225–$2,000).

• Tile Type and Quality: The material significantly impacts price. For example, standard ceramic or travertine tile can cost about $1 per square foot, while luxury options like marble can be as much as $350 per square foot for the material alone.

• Project Size and Complexity: The total square footage, the complexity of the pattern, and the shape of the tile (e.g., square, rectangle, hexagon, mosaic) will affect labor and material costs.

• Site Preparation: The amount of prep work needed, such as removing old tile or installing a new subfloor or backer board, can add to the final price.

• Tile Characteristics: The tile's durability rating and porosity can also influence the price.

• Location: Labor rates vary by geographic location.

Figure out how much tile you need by measuring the backsplash area. Measure the height and length in feet and multiply to get the square footage. Don’t make adjustments for outlets or small cutouts but subtract the square footage for windows or other large obstructions from the total. To account for waste, get 10% more than your calculation.

Yes, provided you aren’t installing drywall over it. But you can skim coat it, apply new tile right on top, paint it, or stencil it. For more budget- and DIY-friendly options, you can install beadboard or apply decals. Just make sure that the current tiles are in good condition and prepped well for the paint or adhesive to stick.

The best trowel for penny tile is a 3/16-inch-by-5/32-inch V-notch trowel. Because of the small size of the penny tile, you want a trowel with small notches that can lay a thin layer of mortar on the surface you’re tiling. If the notches are too wide, you risk applying too thick of a layer of mortar, and it can squeeze out between the penny tiles.