Get matched with top roofers in Oak Hill, OH

It’s possible for a roofing estimate to change after the initial assessment, but in most cases, it shouldn’t. There’s always the risk that something unexpected will happen that causes prices to go up, like discontinued materials or your roofer discovering previously hidden damage to your decking when ripping off the old roof. However, experienced roofers should account for these circumstances in their initial estimates. Roofing contracts are binding, so always check your contract for language about how and why your numbers could change.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Yes, hail damage to your roof can definitely cause water leaks in your roof. This is because hailstones can break, chip, crack, or split shingles of all types, exposing underlayment. This underlayment doesn’t offer as much protection against water, so when it becomes compromised, water can penetrate and leak deeper into your home.

Fall is widely considered the best time of year to replace a roof. The moderate temperatures are ideal for roofing crews to work and for new shingles to seal properly. Additionally, autumn weather is often drier, reducing the risk of weather-related delays compared to the rainier spring season.

While spring is also a viable option, the higher chance of rainfall can slow down the project. The main drawback to a fall installation is that it's the peak season for roofers, which can lead to higher prices and scheduling challenges.

To potentially save money, you could consider scheduling your roof replacement during the summer or winter off-seasons. However, both seasons have significant disadvantages. Extreme summer heat can make shingles too soft to handle, while winter's cold, snow, and ice can create dangerous working conditions and prevent shingles from sealing correctly, as they typically require temperatures above 40-45°F.