Get matched with top stone countertop pros in Nova, OH

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Start your search for a reliable countertop contractor online, and look for companies that have high ratings from past customers. Check each of these companies on the Better Business Bureau website and rule out any that have a high number of complaints or an overall low rating. Next, contact the remaining companies and ask for a list of references and examples of past work. It’s best to choose a provider that has references that are still pleased with the work years later and one that provides professional-looking examples of how it serves its customers.

Yes, a granite countertop can be cut in place. However, learning how to cut a granite countertop in place is a lot trickier than cutting granite in an open, well-ventilated space. You’ll also need to protect everything in the surrounding area (like your kitchen cabinets and appliances), but even that might not be enough to prevent dust from getting stuck in tight spots. If you absolutely must cut a granite countertop in place, consider hiring a pro to get the job done in the cleanest and safest way possible.