Best pressure washers near Midvale, OH

While some pressure washers, when used at lower settings, are ok to use on tires, we suggest proceeding with caution. While the high pressure alone won’t cause damage to your tires, pressure washers emit high-frequency pulsations that can damage the tires’ sidewall cords. Using a medium-bristle brush and soapy water is a better bet if you want to keep your tires in tip-top shape.

The average cost to professionally clean or pressure wash a deck is around $150, with prices typically ranging from $100 to $600. Several factors influence the final price, including the deck's size, material, condition, and how long it has been since its last cleaning. For a smaller deck of about 300 square feet, you might pay around $100. For a larger deck of 1,000 square feet or more, the cost could be closer to $300 to $400. Decks that are very dirty or haven't been cleaned in years may require more time and special detergents, which will increase the price. The deck's material also plays a role. Wood decks often cost more to clean because they require a gentle power washing technique to avoid damage. Composite decks are typically less expensive to clean, and cleaning a metal deck may cost around $100.

If you don’t use the right PSI setting for your fence’s material, then yes, pressure washing can ruin your fence. Specifically, if you use a PSI that's too powerful, you may permanently damage a fence. Pressure washers can also remove paint from fences, though this can be a great thing if you’re looking to restore an old wood fence.

Whether you need to winterize your pressure washer depends on where you store it. If you can keep it in a relatively warm place with no risk of freezing, you won't need to add antifreeze. However, if the machine will be stored in freezing temperatures, any liquid left in the water pump can freeze, expand, and cause severe damage. To prevent this, add antifreeze to keep it in good condition. While some suggest emptying the machine with compressed air, this can be a tedious process that may not fully drain the liquid. Regardless of storage conditions, it is also good practice to empty the gas chamber and refresh the oil before winter storage.