Best deck repair pros near Madison, OH

Yes, adding a composite deck, such as one made from Trex, can significantly increase your home's value. It is a valuable home renovation for recouping costs, with some estimates for return on investment (ROI) ranging between 60% and 70%. More recently, Remodeling's 2024 Cost vs. Value Report suggests a deck addition has an ROI of 82.9%, with an average resale value of nearly $14,600. A new deck makes your yard more functional, enhances the landscape's aesthetic, and can entice prospective buyers. The investment may have a higher return if the deck adds usable square footage to the property.

Yes, deck pier blocks can be used as an alternative to traditional deck footings, especially for smaller or low-to-the-ground decks. Unlike poured concrete and buried post footings, deck blocks do not require digging or pouring. However, their use is dependent on local building codes. Some areas, particularly those prone to high winds, earthquakes, or hurricanes, may not permit the use of deck pier blocks. It is essential to consult your local building codes before choosing them for your deck project.

Footings for ground-level decks need to be at least 12 inches deep, and some areas require them to be even deeper. A standard range for deck footings is anywhere from 12 to 48 inches. The minimum footing depth is determined by an area’s frost line and soil conditions. If you’re unsure how deep to install deck footings, check local building codes to find the minimum footing depth in your area. 

Cutting the boards directly is one of the fastest ways to remove deck boards with hidden fasteners. Mark two parallel lines that are one-third of the total measurement on both ends and cut out the centerpiece. Then, remove the end of the board that doesn’t have a fastener. Finally, pry open the fastened side and pull it up to pop out the screw or access the fastener. This also allows you to salvage portions of boards for other projects.