Best countertop and backsplash pros near Lakeview, OH

The best type of wood for countertops is hardwood. Hardwood is much more durable and resilient than softwood, so it won’t scratch or dent as easily. Oak, cherry, maple, walnut, and teak are all popular options that are relatively common in North America. Some homeowners prefer to use pine or cedar, but make sure to seal your countertop to help prevent damage. Yellow pine fares better than white pine.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Butcher block countertops are easy to clean. You can use basic household cleaning materials like soap and water. You can even use vinegar or lemon juice and salt. There aren’t many special precautions like other materials. For example, soap tends to streak stainless steel while acid-based cleaners can wear down quartz.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.