Best sink repair pros near Boardman, OH

Silicone caulk—despite having some adhesive properties—is not the primary thing that holds your sink in place. Rather, it seals the gaps around the sink to prevent water from leaking and causing issues with mold and corrosion. Most sinks are secured by clips, though some sinks are secured with two-part epoxy or brackets.

The biggest sign that your flange leaks is if you notice water at the base of the toilet. The cause is likely due to a poor flange installation, so you might have issues with loose bolts, an uneven flange, or a cracked plastic flange. Add a deteriorating wax seal to this, and you have a recipe for disaster. The best solution is to shut off the water valve, replace the toilet flange, and seal it with a new wax ring.

Try to tighten the clevis crew and adjust the lift rod if your sink stopper won’t stay up. Sometimes your screws became too loose over time, and as a result, there wasn’t enough resistance to keep the sink stopper up. If a damaged lift rod is the cause of the problem, you will need to replace it with a new rod.

There are several types of sink drain stoppers, including pull-out, twist-and-pull, and pop-up. Pull-out sink stoppers can be removed by pulling on the stopper until it comes out of the drain. A twist-and-pull design requires lifting then turning the stopper to lock it in an open position and the opposite action (turning, then pressing down) to close it. A pop-up sink stopper works by pushing down the drain cover to open or close the passageway.