Get matched with top door pros in Sackets Harbor, NY

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

The average fiberglass door that you purchase from your local door company or home improvement store will last around 20 to 40 years, so fiberglass doors are considered durable compared to other door materials. When properly maintained, it's not unheard of for a fiberglass door to last up to 80 years.

Barn doors do not always require a bottom track, especially if a high-quality top track is used to stabilize the door. However, a bottom track is often recommended to ensure the door operates smoothly, prevent it from scratching the floor, and keep it from pushing inward or outward, which could cause damage. A bottom track also keeps the door more secure and properly anchored. In some cases, an interior barn door can hang solely from a top track without a bottom guide. If you do install a bottom track, it should be placed six to eight inches from the floor and be at least twice as wide as the door.

This hack required some hand strength. First, bend the fork's tines. Next, slip the pointed ends into the door latch and close the door. Open the door to remove the fork and break off the fork's handle. Reinsert the fork's head into the door latch and close the door. Finally, slide the fork's handle through the tines, creating a horizontal barrier that prevents the door from opening inward.