Best garage pros near Sackets Harbor, NY

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

Your epoxy garage floors will last two to 10 years, depending on foot traffic and maintenance. Clean your floor regularly with a mop or a power washer using a diluted ammonia or degreaser solution. Use five ounces of ammonia per gallon of water or a half-cup of degreaser per gallon of water.

Also, sweep regularly, clean up any spills right away, and install mats in places where you expect the most foot traffic.

If you plan on heating your garage, you must install a vapor barrier when drywalling the garage. A vapor barrier protects your garage from frost and mold that can occur through condensation. If your garage is unheated, you don't need to install a vapor barrier. The only exception is if you regularly crank the heat in your car before getting in it. In this case, you may still want to install a vapor barrier, as your car can heat your garage.

Sliding garage doors aren’t popular because when they can be inconvenient—they require you to leave your car—if they’re manual. But, if they’re automatic, they’re much more expensive than a conventional tilting door. Some find the sliding door less aesthetically pleasing than a tilting or barn door.