Get matched with top backsplash installation pros in Russia, NY

Yes, you can install a backsplash directly onto drywall, provided the wall is properly prepped, clean, and dry. For best results, especially in kitchen areas, your walls should be made of moisture-resistant drywall, often called green board. If your current wall isn't moisture-resistant, it's recommended to replace it before installing the backsplash. For even greater protection against water damage, you can remove the existing drywall and install a tile backer board or cement board instead. While properly installed standard drywall is typically strong enough to support a backsplash, some local building codes may require water-resistant materials in kitchen areas, so it's a good idea to check.

There isn’t a one-size-fits-all best tile for a dog shower. Consider your budget, tile durability, aesthetics, and, most importantly, practicality. Avoid tiles your dog will slide around on. Pebbles are a great non-slip option, but are pricey and tricky to install. Glass might look modern, but it’s not scratch-resistant. Small, floor-rated ceramic or porcelain tiles are economical and have many grout lines that make the surface more slip-resistant. Pick a matte finish rather than a shiny tile if you want it to hide stray mud and hairs better.

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward. 

You can lay tile directly on a plywood countertop, but if it’s a high-traffic surface in a kitchen, it’s better to add a moisture-resistant base. Plywood is susceptible to moisture, so if dampness seeps through from the surface around the sink or where you prep food, it can cause the plywood to warp, leading to grout damage, cracked tiles, or mold growth under the surface.