Get matched with top pressure washers in Millbrook, NY

The average cost to professionally clean or pressure wash a deck is around $150, with prices typically ranging from $100 to $600. Several factors influence the final price, including the deck's size, material, condition, and how long it has been since its last cleaning. For a smaller deck of about 300 square feet, you might pay around $100. For a larger deck of 1,000 square feet or more, the cost could be closer to $300 to $400. Decks that are very dirty or haven't been cleaned in years may require more time and special detergents, which will increase the price. The deck's material also plays a role. Wood decks often cost more to clean because they require a gentle power washing technique to avoid damage. Composite decks are typically less expensive to clean, and cleaning a metal deck may cost around $100.

No, you should not pressure wash or power wash roof shingles, including asphalt shingles. The high water pressure from these machines is too strong and can damage the shingles by forcing water underneath, loosening their adhesive, and causing them to fall off. A safer and better alternative is soft washing with a pump sprayer. To ensure the job is done safely without causing damage, it is best to hire a local roof cleaner.

Power washing asbestos siding can be hazardous and isn't recommended. The power washer's high pressure can disturb the siding and release harmful asbestos fibers into the air. Rather than attempting to DIY it, hire a professional trained in asbestos handling to tackle any exterior cleaning.

Yes, you can technically use a pressure washer to remove paint from brick, but it comes with a significant risk of damaging the brick surface. A high-power pressure washer can be fast but may leave the brick looking unsightly. The recommended method is to first apply a chemical paint stripper, following the product's instructions, and then use a stiff metal bristle brush or a pressure washer on a low-pressure setting to remove the loosened paint. Due to the risk of damage, it is often best to hire a professional who can use low-stress methods.