Get matched with top electricians in Memphis, NY

Memphis homeowners rate electricians in our network

4.8

(302 reviews)

Top-rated electricians.
Electrical questions, answered by experts

The most common reason a GFCI outlet would trip even when nothing is plugged in is if there’s a problem at the circuit breaker end. This could be an overloaded circuit, with too many appliances plugged into it, or another type of fault. If a GFCI outlet keeps tripping, it can also be because it is faulty and needs replacing.

If there’s already a suitable outlet near the range, you likely won’t need an electrician to install an over-the-range microwave. However, if there isn’t an existing outlet or the current one doesn’t meet the microwave’s power needs, you’ll probably need an electrician to install a new outlet. 

Home power is measured in kilowatt-hours, commonly expressed as kWh. The average home uses between 800 and 1,000 kWh per month. Peak usage (and highest bills) occurs in the middle of summer and the depths of winter. Keeping on top of your usage during these crucial months will lower your annual average usage considerably. 

No, it is not safe to use an outlet that sparked. A spark from an outlet could indicate a short circuit, loose or frayed wiring, or other serious damage. Continuing to use an outlet that sparks can increase the risk of electrical shock, electrical fires, and other hazards. It's important to turn off the power to the outlet at the circuit breaker if possible and avoid using the outlet until a licensed electrician has inspected and repaired it.

Grounding is an essential part of installing an electric fence. Without grounding, the electrical circuit will be incomplete. That means the fence won’t work and will fail at delivering shocks upon impact. Even grounding the fence improperly can cause faulty shocks, if any. To ground the fence, you will need to use ground rods, ideally made from copper or galvanized metal, that are at least 4 feet high, for best results.