Get matched with top painters in Johnson City, NY

You can paint concrete with paint rollers. In fact, using paint rollers is considered one of the easiest ways to evenly apply paint on concrete. A paint roller with a 1/2- to 3/4-inch-thick nap—which is basically a fabric paint roller cover—is best for painting concrete. The thicker the nap, the more paint it can hold to fill those pesky concrete cracks and crevices.

Yes, you can paint most wall panels. In fact, many wall panels come unfinished, meaning you can stain or paint them in any color you choose. Unfinished wall panels are usually less expensive than finished panels, although you should consider the time it will take you to finish them yourself when deciding if the monetary savings are worth it. You can save some money on the labor of finishing your panels if you go the DIY route, though.

If your wall panel already has a stain or paint color on it, you can often paint over it as well. You'll just want to make sure you properly treat the area before painting.

You can’t paint a foundation like you would the walls in your home; there are a few extra important steps to take. Instead of just busting out the paint, you should clean the surface and fix any impurities before grabbing the brush. Using a paint sprayer to apply sealant and primer will ensure you have the perfect canvas to apply your chosen paint color.

Unless you’re using a 2-in-1 formula or painting over an existing coat of paint, it pays to apply a coat of primer ahead of your new paint. Decks see a lot of footfall and exposure to extreme and sudden temperature changes and moisture levels. The primer promotes better paint adhesion, moisture repellency, and a smoother finish, which means you’ll often need fewer coats of paint.