Get matched with top gutter cleaning pros in College Point, NY

If you want to avoid burying your downspouts, several alternatives can help direct water away from your home's foundation. One option is to connect a rain barrel to your downspout. During a storm, the barrel collects water that you can later use for irrigating your lawn or garden. Another common solution is to install an above-ground downspout extension. This can be done in a couple of ways:

• Splash Guards: Placing a splash guard, available at most hardware stores, under your downspout can act as a simple funnel to direct water away from the house.

• Downspout Extensions: You can add an extension to the end of the downspout's elbow to carry water further into your yard. Some extensions are flexible, allowing you to maneuver them around landscaping.

These above-ground solutions are particularly useful if your home has a slab foundation that you cannot dig up. However, they have limitations. An extension may not move water as far from your home as an underground system. More importantly, if your yard slopes back toward your house, these methods will be ineffective, and burying your downspouts remains the best option to prevent potential flooding and water damage.

You can clean the gutters on a two-story house using gutter tongs on an extension pole. However, cleaning second-story gutters from a ladder or the roof is very dangerous and should be done by a professional.

Buried downspouts can freeze during cold weather as cold water runs through them. If you’ve discovered your downspouts are frozen, you can carefully pour hot water down the top of the downspout to defrost them. If that doesn’t work, you may need to dig your downspout back up. Avoid trying to break the ice from the exterior using a hammer as this can cause cracks and damage to your downspout.

To avoid freezing the future, consider adding a heating cable to the exterior, which can adjust heat based on the surrounding temperature.

Yes, you can use a pressure washer to effectively clean debris, dirt, and grime from your gutters, but it must be done with caution to avoid damage. Always use a low-pressure setting, with a recommended range between 1,200 and 1,800 PSI. Excessive pressure can bend or dent aluminum gutters, damage seams, peel paint, or even knock shingles off your roof, potentially leading to leaks and moisture issues. For a safer alternative, consider soft washing or cleaning them by hand. When using a pressure washer, it is safer to use gutter elbow extensions from the ground rather than climbing a ladder, as the force can cause instability. Due to the risks, you may want to hire a licensed and insured contractor for the job.