Get matched with top siding pros in Clintondale, NY

The telltale signs that your home is ready for repointing include visibly damaged bricks, crumbling bricks, flaking bricks, loose mortar, cracked mortar, gaps between brick and mortar, leaking inside your home, and visible water damage. Consider repointing when going over brick house pros and cons if you're buying a new home. Repointing is also a good idea if you plan to paint, acid wash, or stain your brick home, as it will give you a good base for coloration and prevent repairs after the work is done.

You should restain or refinish your home's cedar siding every three to seven years to maintain its appearance and ensure maximum protection. The precise frequency depends on several factors, including your local climate, the siding's exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the condition of the wood.

Homeowners in harsh climates with high humidity and significant direct sunlight should plan on restaining every three years, while those in milder locations can wait up to seven years. For the longest-lasting protection in particularly harsh environments, consider using an opaque stain.

If you're looking for a lower-maintenance alternative, vinyl or aluminum siding are options to consider. Although their installation cost may be higher, they don't require as much upkeep over time, which can provide more value, especially in areas with excessive rainfall or high humidity.

Choosing siding combinations that look good together comes down to finding textures and colors that complement each other. You want some contrast so that your home doesn’t look boring or too uniform, but you also want the materials to play off of each other so that each makes the other stand out. It’s a good idea to hire a siding professional to create 3D renderings for you so you can get a sense of what your home will look and feel like before you get started.

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.